-
+ Excellent lubricity + Anticorrosion properties + Excellent pumpability DYNAMAX AK 2 lubricant is made on the basis of refined mineral oil with a viscosity of approx. 110 cSt/40°C with the use of a complex aluminum thickening agent and other additives guaranteeing reduced wear, improved antioxidant and anti-corrosion properties. Temperature range of use: from -30°C to +100°C (short-term up to +120°C with regular lubrication) Even at various changing temperatures (high and low), the lubricant maintains its mechanical structure, forms a stable lubricating film, maintains excellent pumpability and does not leak from the lubrication point. Thanks to the additives, it has excellent resistance against flowing water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of rolling and sliding bearings used in industrial, agricultural and other mobile equipment at low and medium loads and speeds. Also suitable for lubrication of axles, joints, threads, small gears, individual and central lubrication systems. SDS-Dynamax AK 2 CLP2017 TDS-Dynamax AK 2 -
+ Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX LTA 2EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 180 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +120°C (short-term up to +140°C with regular lubrication). Even under high pressure, the lubricant maintains its structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of sliding and rolling bearings, working under high loads and high pressures when axial and radial forces are applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to impact loads. Also suitable for lubrication of axles and joints, individual and central lubrication systems. SDS-Dynamax LTA 2 EP CLP2017 DYNAMAX LTA 2EP (TDS, 2018) -
+ Excellent lubricity + Anticorrosion properties + EP additives DYNAMAX LTA 3EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 150 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +130°C. Even under high pressure, the lubricant maintains its mechanical structure, forms a stable lubricating film, does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Intended for the lubrication of rolling bearings working under high loads and high pressures where radial force is applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to shock loads and vibrations in mobile technology and industry. Especially suitable for road and rail vehicle bearings. Also suitable for the lubrication of small gears with light to medium loads and other lubrication points, including screw connections. SDS-Dynamax LTA 3 EP CLP2017 TDS-Dynamax LTA 3EP -
DYNAMAX OTHP 32 is a crude oil distillate with special additives that provide higher performance. It contains viscosity modifier which serves as a viscosity depressing agent. This oil is suitable for lubrication of automatic transmissions as well as steering and brake boosters. It can be also used for hydrodynamic systems in buses, construction machinery etc. SDS-Dynamax OTHP 32 CLP2017 TDS-Dynamax OTHP 32 -
DYNAMAX TB 46 is petroleum based turbine oil with antioxidant and anti-corrosion additives that improve their performance. It is characterized by excellent oxidation stability, good anti corrosion, anti foaming and demulsification qualities.It is designed for the lubrication of steam, gas and hydraulic turbines, turbo compressors, fast running gear units, can also be used as a hydraulic fluid in turbine control systems and for lubrication of marine turbo loaders of main and auxiliary engines fueled by gases,in circulation systems of machinery requiring turbine quality oils, for example. turbocompressor and turbine pumps.
-
DYNAMAX TB 32 is petroleum based turbine oil with antioxidant and anti-corrosion additives that improve their performance. It is characterized by excellent oxidation stability, good anti corrosion, anti foaming and demulsification qualities.It is designed for the lubrication of steam, gas and hydraulic turbines, turbo compressors, fast running gear units, can also be used as a hydraulic fluid in turbine control systems and for lubrication of marine turbo loaders of main and auxiliary engines fueled by gases,in circulation systems of machinery requiring turbine quality oils, for example. turbocompressor and turbine pumps.
-
DYNAMAX OKVC 150 is designed for the lubrication of piston air compressors and rotary vane compressors with dripping lubrication during undemanding operating conditions.Compressor oil DYNAMAX OKVC 150 is hydrogenated petroleum oil with high chemical stability even in higher temperatures. It contains additives to increase the viscosity index and to decrease pour point.
-
SDS-Dynamax OKVC 100,150 CLP2017DYNAMAX OKVC 100 is designed for the lubrication of piston air compressors and rotary vane compressors with dripping lubrication during undemanding operating conditions. Compressor Oil DYNAMAX OKVC 100 is hydrogenated petroleum oil with high chemical stability even in higher temperatures. It contains additives to increase the viscosity index and to decrease pour point.
-
DYNAMAX Emulgol DS 30 is used in the form of aqueous,cooling and lubricating emulsions in turning steel, cast iron, non-ferrous metals. Recommended working concentration of emulsion (prepared in water with hardness up to 20 ° N) depending on the method and material: 3-5% grinding,5-10% turning, milling, drilling, 10-15% threading. SDS-Dynamax Emulgol DS 30 CLP2017 DYNAMAX Emulgol DS 30 (TDS, 2018)
-
KINEMATIC VISCOSITY AT 40 °C : 6 9 , 3 m m 2 / s VISCOSITY INDEX: 94 Bearing quality oil containing ingredients that benefi cially aff ect oxidation stability and prolong the life of the bearings. It is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery. DYNAMAX OL 46, 68 (SDS, CLP2017)
-
DYNAMAX OL 46 is used to lubricate the bearings of larger electric motors,fans, etc.., also for long-term fillings of systems for machine tools,for hydraulic system of presses, crank mechanism of piston machines and so on. It is also used for preparation of hardening baths.Bearing oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
-
SDS-Dynamax OL 22, 32 CLP2017DYNAMAX OL 32 is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-termlubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
