-
DYNAMAX M2T SUPER HP is a high quality petroleum oil produced by modern technology containing additives suppressing sediments in piston grooves, exhaust ports, electrodes of spark plugs and also containing additives improving the lubricity of oil. Protects piston from abrasion and engine components from premature wear. Has excellent miscibility with gasoline, forming a homogeneous and stable mixture even at low ambient temperature. Recommended for all two-stroke engines of motorcycles, scooters or hand-held garden tools requiring API TC and/or JASO FD specification. -
DYNAMAX CHAIN SAW OIL 100 is a top quality oil used for the chain lubrication, so that the chain does not break or get jammed. It contains a special additive that provides better adhesive strength at the chain to avoid oil loss. It is not suitable to lubricate the engine of the chain saw! SDS-Dynamax Chainsaw oil 100 CLP2017 TDS-Dynamax Chainsaw Oil 100 -
High performance ashless 2-stroke engine oil to meet the most critical requirements of the latest outboard and snow mobile engines. It exceeds the stringent perfor¬mance requirements of the National Marine Manufacturers Association’s specification NMMA TC–W3®. SDS-Dynamax 2T Outboard CLP2018 TDS-Dynamax 2T Outboard -
+ Reduces soot and exhaust gas emissions + Supports the regeneration of the diesel particulate filter High-performance additive for use in all diesel aggregates to reduce soot and exhaust gas emissions and to increase engine performance. Suitable for all kind of diesel fuels. DYNAMAX DPF CLEANER (TDS, 2024) DYNAMAX DPF CLEANER (SDS, 2023) -
+DISSOLVES DEPOSITS AND DEFECTS +REGENERATES FULL DPF/GPF FUNCTIONALITY Highly effective additive for effective removal of grease, soot and solid carbon deposits from diesel and gasoline particulate filters (DPF and GPF) while dismantled. The product has been specially formulated to penetrate deep into the pores of the filter, loosen even the most stubborn deposits and maximize the filter's reverse permeability without mechanically damaging its microstructure. Suitable for all DPFs and GPFs. Does not contain abrasive or corrosive substances that would damage the ceramic, composite or metal structure of the filter. Restores the original permeability of the filter and regenerates its full functionality. Does not leave sticky or greasy residues. Suitable for all DPFs and GPFs. Usage:- Remove the filter from the vehicle.
- Dilute the product with water in a ratio of 1:4 (1:1 in case of heavy contamination).
- Pour 3 to 5 liters (depending on the size of the filter) of the product into a suitable container or cleaning tank and immerse the filter in it.
- Let the product act for approximately 8-10 hours.
- Regularly check the filling level and top up if necessary.
- Remove the filter from the liquid, empty it and rinse it thoroughly with clean water.
- Reinstall the filter in the vehicle and perform a test drive for at least 15 minutes.
-
+ USE WITHOUT DPF/GPF DISASSEMBLY + DISSOLVES DEPOSITS AND DEFECTS + REGENERATES FULL DPF/GPF FUNCTIONALITY Highly effective cleaning fluid "Air Jet Fluid" designed for regeneration and cleaning of diesel and gasoline particulate filters (DPF and GPF) without the need for disassembly. The product is designed to effectively disrupt and remove soot, ash and deposits from the surface and depth of the filter through the access points of the system in the form of a fine aerosol spray. Chemically activated components penetrate deep into the pores of the DPF/GPF and facilitate the removal of even older deposits. Allows you to restore the function of the DPF/GPF directly on the vehicle, without complicated filter removal, and at the same time reduces service time without long vehicle downtimes. After application, no sticky or greasy layers remain that would affect the filter performance. The composition is compatible with compressed air and mechanical spraying technologies. Does not contain abrasive or corrosive components that could damage the ceramic, metal or composite structure of the filter. Usage:- Make sure that the exhaust system has no leaks and is working properly.
- Remove the temperature and/or pressure sensor.
- Dilute the liquid with water in a ratio of 1:3 (1:2 for heavier contamination).
- Fill the spray gun with liquid and set the pressure in it (2.5-4.0 bar).
- Inject the liquid into the filter through the service opening / access port.
- Start the engine and leave it idling during cleaning. Spray the product at 5 second intervals through the removed opening. We recommend using at least 500 ml of product depending on the contamination. Repeat the procedure if necessary.
- Reinstall the sensors and perform a test drive. The soot that was dissolved during cleaning will be burned off during regular regeneration.
-
+ Removes contaminations in the whole fuel system + Optimalisation of fuel consumption + Suitable for common rail technology and pump injectors Contains a selected combination of active substances for protection against wear. Deposits and residues of carbon, oil and soot are properly dissolved and dispersed. Ensures lasting lubrication of the injection pump and all moving parts. Also suitable for high pressure systems with direct injections and Common rail system. DYNAMAX DIESEL SYSTEM CLEAN PROTECT (SDS, 2023) DYNAMAX DIESEL SYSTEM CLEAN PROTECT (TDS, 2024) -
+ Improwed flow and lubrication properties + Prevents again parafine crystals up to -28°C Ensures improved flow properties of all diesel fuels and is suitable for use in all diesel aggregates with or without DPF. Effectively prevents against formation of paraffin crystals, protects and lubricate whole fuel system up to the -28°C (depending on the fuel quality). Prevents corrosion. DYNAMAX Diesel Winter Care Shot (SDS, CLP2018) TDS-DX Diesel Winter Care SHOT -
+ Disinfects the complete diesel system / tanks + Stops formation of bacteria and fungi Suitable for use in all diesel aggregates and diesel storage tanks. High-performance concentrate with a wide action spectrum for removing and preventive use against bacteria, fungi and yeasts in equipment that is out of service for a longer period. DYNAMAX Diesel Bactericide (SDS, CLP2018) TDS-DX Diesel Bactericide -
+ Removes contamination and unburned carbon residues in fuel system + Dissolves contamination from carburetor and injection system + Binds moisture and condensed water Ensures effective cleaning of the entire fuel system from the tank to the combustion chamber. Removes operationally caused contamination and prevents formation of new deposits. Also suitable for cold starts in winter period. DYNAMAX Gasoline System Clean & Protect (SDS, CLP2017) DYNAMAX Gasoline System Clean & Protect (TDS, 2016) -
+ Optimizes the fuel consumption and exhaust gas emissions + Cleans valves and injector nozzles Ensures effective cleaning of valves, injector nozzles and the inlet area without dismantling. Removes operationally caused contamination in the entire petrol injection system. DYNAMAX VALVE INJECTOR CLEANER (TDS, 2024) DYNAMAX VALVE INJECTOR CLEANER (SDS, 2023) -
+ Increases the octane number up to 3 points + Improves starting and performance properties Additive to increase the octane number of low octane fuels or for use in engines with higher octane requirements. DYNAMAX OCTANE BOOSTER (SDS, 2023) DYNAMAX OCTANE BOOSTER (TDS, 2024)
