Specifications: FM SAFETY STANDARD 116 DOT3 a SAE J 1703 ISO 4925 Brake fluid designed as a refill for all brake,clutch and other hydraulic systems and mechanisms. It is miscible with other brake fluids of corresponding class. DOT3 - intended for operation in the temperature range -50 ° C up to 240 ° C. Pure liquid with a hint of yellow colour and pungent aroma. It is used undiluted. SDS-DX DOT 3 CLP2017 TDS-DOT 3
-
-
Silicon spray that lubricates and protects plastic, metal or rubber parts. Product characteristics: Prevents creaking, squeaking and corrosion. Prevents freezing and drying out. The product is water-repel-lent and has outstanding mechanical and thermal stability. Usage: Shake before use. Optimum lubrication is gained after the evaporation of the solvent. DYNAMAX Silicon spray (SDS, CLP2018) DYNAMAX Silicon spray (TDS, 2018) -
Winter screenwash fluid for cars. Reliably removes grease and other dirt from glass and headlights. Protects the washer system from freezing and sediments down to -20°C. Improves visibility during unfavorable winter weather conditions.- Ecological packaging (made from recycled rPET materials)
- Effective cleaning and protection of the sprinkler system
- Gentle on rubber parts and car headlights
-
Specifications: NLGI 2 Performance profile: DIN 51502/51825 + Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX LTA 2EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 180 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +120°C (short-term up to +140°C with regular lubrication). Even under high pressure, the lubricant maintains its structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of sliding and rolling bearings, working under high loads and high pressures when axial and radial forces are applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to impact loads. Also suitable for lubrication of axles and joints, individual and central lubrication systems. DYNAMAX LTA 2EP 100 ml (SDS, 2023) DYNAMAX LTA 2EP (TDS, 2023) -
Viscosity grade: SAE 30 Performace profile: API CE/CF4 Specifications: MB 228.0, MAN 270, LIAZ 258-1, DAEWOO-AVIA DYNAMAX M6ADSII is mainly used for the lubrication of automotive, tractor, marine and stationary diesel engines of modern structures.Engine oil for lubrication of demanding naturally aspirated or turbocharged four-stroke diesel engines, working under difficult conditions, especially in transitional and summer periods. -
DYNAMAX OHHM 46 is hydrotreated petroleum oil,with additives to improve oxidation stability,to reduce corrosion and with anti wear qualities and anti-foam additives. Contains a viscosity modifier.Hydraulic oil OHHM 46 is designed for hydrostatic mechanisms with high mechanical and thermal strain, for stable and mobile machines working in unprotected environments. They can be used all year round and are compatible with most of the hydraulic oils from other manufacturers. -
+ Increases the octane number up to 3 points + Improves starting and performance properties Additive to increase the octane number of low octane fuels or for use in engines with higher octane requirements. DYNAMAX OCTANE BOOSTER (SDS, 2023) DYNAMAX OCTANE BOOSTER (TDS, 2024) -
Technical demineralized water intended to dilute the concentrates of DYNAMAX antifreeze screen wash, summer screen wash and DYNAMAX cooling liquids. Suitable to use in accumulators, steam irons, in photographic laboratories. SDS-DX Demi water CLP2017 TDS-DX Demineralized water -
High effective cleaner for carburettors. On visible carburettor parts (air passages, adjusting screws, venturi, outside parts). On throttle valve and choke. High dissolving properties. Leaves no residue. Non-corrosive. On the positive crank case ventilation valve. Usage : Processing temperature 5 – 30°C. Allow engine to cool down and remove air filter. Spray on the carburettor several times until the contamination has disappeared. SDS-Dynamax Carburettor Cleaner spray CLP2017 DYNAMAX Carburettor Cleaner spray (TDS, 2017) -
Effective tool to loosen rusted or pressed connections. Product characteristics: Directed jetspray. Brie lowers temperature to –50°C. The aerosol should have room temperature. Processing temperature 5 – 30°C. Spray the connection by repeatedly pressing the nozzle brie y. As a result of the erce decrease in temperature, the connection can be loosed. -
+ ACTIVE PROTECTION + WEAR PROTECTION + UNIVERSAL USE Viscosity grade: SAE 10W-30 Performace profile: API GL-4, DIN 51524-3 (HVLP-D) Specifications: Allison C-4 Caterpillar TO-2 CNH MAT 3506, CNH MAT 3525 CNH MS 1206, CNH MS 1210, CNH 410 B Deutz-Allis AC Power Fluid 821 XL FNHA 2-C-200.00 Ford ESN-M2C 86-B/-C, Ford ESN-M2C 134-D John Deere J20 C, John Deere J21 A Massey Ferguson CMS M1135/M1141/M1143/M1145 Renault 180596 SDFG OT 1891 A VOLVO BM WB 101 (BM Valmet, AWB Achsen) White Farm (AGCO) Q-1802/Q-182616, ZF TE-ML 03E/17E/05F/21F ZF TE-ML 06K/06R/06S Premium high quality universal tractor transmission oil (UTTO) with a viscosity of 10W-30, composed of carefully selected basic components and advanced additives. Developed for lubrication of combined gear/transmission and hydraulic systems of tractors and other agricultural and construction machinery in all weather conditions.Thanks to its excellent friction, it is suitable for use in "wet brakes" in clutches with load shifting and auxiliary drives. Characterized by a very high and stable viscosity index, favorable friction behavior in power shift clutches and auxiliary drives, high pressure absobrtion capacity, high oxidation stability and excellent protection against wear, foaming and corrosion. -
Approvals: APPROVAL VW_ULTRA_PLUS_PD_5W-40 DYNAMAX PREMIUM ULTRA PLUS PD 5W/40 (SDS, 2023) DYNAMAX PREMIUM ULTRA PLUS PD 5W/40 (TDS, 2024)Viscosity grade: SAE 5W-40 Performace profile: API SN/CF, ACEA A3/B4/C3 Specifications: VW 502.00/505.00/505.01, BMW Longlife-04, MB 229.51, MB 226.5, Ford WSS-M2C917-A, Porsche A40, GM Dexos2 DYNAMAX ULTRA PLUS PD is the most recommended for latest generation of highly burdened petrol, LPG and diesel engines in cars and light vans,requiring compliance with specifications ACEA A3/B4 and ACEA C3, including the EURO IV emission standards. DYNAMAX ULTRA PLUS PD is a high performance, low emission, year-round ,synthetic engine oil meeting the requirements of mid SAPS (Sulphated Ash, Phosphorus & Sulphur). Oil extends engine life and the life of equipment for treatment of exhaust gases, which are in use in the latest generation of petrol and diesel engines in cars. DYNAMAX ULTRA PLUS PD reduces the ash content in diesel particulate filters (DPF).