//Oils
  •

    DYNAMAX GEAR 80W-90 GL-4

    . Viscosity grade: SAE 80W-90 Performace profile: API GL-4 Specifications: Autosan S. A., Eaton Truck Components S.A. DYNAMAX GEAR 80W-90 GL-4 is a petroleum transmission oil containing additives to increase a bearing capacity of the lubricating film. Mineral oil guaranteeing always good lubricating properties, high resistance to oxidation and high ability to carry the strain. Transmission oil designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 80W-90 oils with a performance level API GL4. Designed for lubrication of vehicles operating in very difficult operating conditions, such as: high speed and low torque or low speed and high torque.   SDS-Dynamax Hypol 80W90 GL-4 CLP2017 TDS-Dynamax Hypol 80W90 GL4  
    Zobraziť

  • DYNAMAX HYPOL 75W-90 GL-5

    Viscosity grade:  SAE 75W-90 Performace profile:  API GL-5 Specifications: MIL-L 2105D, MB 235.0, MAN 342 Typ M-1, ZF TE-ML 05A, 07A,16B/C/D, 17B, 19B, Volvo 97310   Gear oil DYNAMAX Hypol 75W-90 GL-5 is designed  for the lubrication of mechanical gear units  of cars and drive axles, which require SAE 75W-90  oils with a performance level API GL5. Automotive gear oil DYNAMAX Hypol 75W-90 GL-5 is a synthetic oil with low friction and peak power. It contains special additives to enhance corrosion protection, mitigation wear material. This gear oil has very good low temperature properties that allow optimal operation of all moving parts and facilitate gear shifting in cold.
      SDS-Dynamax Hypol 75W90 GL-5 CLP2017 DYNAMAX Hypol 75W/90 GL5 (TDS, 2021)
    Zobraziť

  • DYNAMAX GEAR 75W-80 GL-4

    . VISCOSITY GRADE: SAE 75W-80 PERFORMANCE PROFILE: API GL-4 SPECIFICATIONS: MB 235.4; Volvo 97305; MAN 341 E3/341 Z4; Iveco; Renault B0032/2; Eaton Europe; ZF TE-ML 01L/02L/08/16K High-quality synthetic heat-stable gear oil with extended life, designed for passenger and commercial vehicles that use manual transmissions equipped with various synchronizers, including the latest carbon-based.   SDS-Dynamax Hypol 75W80 CLP2018 TDS-Dynamax Hypol 75W80 GL4
    Zobraziť

  • DYNAMAX PP 90

    Viscosity grade:  SAE 90 Performace profile:  API GL-4 Gear oil DYNAMAX PP90 is a petroleum oil containing additives to increase a bearing capacity of the lubricating film.
    Gear oil DYNAMAX PP 90 is designed for the lubrication of mechanical gear units and final drives (except hypoid), cars and cellular mechanisms that require oil with higher viscosity. Gear oil Dynamax PP 90 is suitable for gear units of vehicles AVIA 21 and 31, LIAZ, KAROSA, IKARUS 280.
    Zobraziť

  • DYNAMAX PP 80

    Viscosity grade: SAE 80W Performace profile: API GL-4 Gear oil DYNAMAX PP80 is a petroleum oil containing additives to increase a bearing capacity of the lubricating film.
    Gear oil DYNAMAX PP 80 is designed for the lubrication of mechanical gear units and final drives (except hypoid), cars and cellular mechanisms exposed to low temperatures. Gear oil Dynamax PP 80 is suitable for gearboxes of vehicles TATRA 148 and 815, Praga V3S and S5T.
    Zobraziť

  • DYNAMAX MOTOFORCE 2T SYNTECH

    Performace profile:  API TC, JASO FD, ISO-L-EGD Dynamax Motoforce 2T Syntech – high quality synthetic oil recommended for two-stroke engines of motocycles and scooters. It is based on high quality synthetic base oils combined with special additives. Protects a piston against abrasion and engine components against premature wear.
    It has excellent miscibility with petrol, forming a homogeneous and stable mixture even at low ambient temperature. Suppresses the formation of deposits in piston grooves, on the exhaust ports or sparking plug electrodes. Extends engine life without engine powerloss.
    Zobraziť

  • DYNAMAX MOTOFORCE 2T SUPER

    Performace profile:  API TC, JASO FD,   ISO-L-EGD Dynamax Motoforce 2T Super – high quality semisynthetic  oil recommended for high-performance two-stroke air-cooled petrol engines. It is suitable for direct oil injection system, as well as oil lubricating systems with pre-mixed composition. It is based on high quality mineral and synthetic base oils combined with special additives. Protects a piston against abrasion and engine components against premature wear. It has excellent miscibility with petrol, forming a homogeneous and stable mixture even at low ambient temperature. Suppresses the formation of deposits in piston grooves, on the exhaust ports or sparkingplug electrodes. Extends engine life without engine-powerloss. Recommended mixing from 50:1 to 25:1.
      SDS-Dynamax MF 2T Super CLP2017 TDS-Dynamax MF 2T Super
    Zobraziť

  • DYNAMAX MOTOFORCE 2T

    Performace profile: API TC, JASO FB Dynamax Motoforce 2T  is a high-quality motor oil produced on mineral base, containing additives suppressing sediments in piston grooves as well as the additives improving the lubricating oilability. It is suitable for both direct oil injection as well as for lubricating systems with premixed composition.   SDS-Dynamax MF 2T CLP2017 DYNAMAX MF 2T (TDS, 2017)  
    Zobraziť

  • DYNAMAX MOTOFORCE 2T SUPER SCOOTER

    Viscosity grade:  SAE 40 Performace profile:  API TC, JASO FC
     
    Dynamax Motoforce 2T Super Scooter – is a motor  oil for all-season lubrication of highly loaded twostroke engines lubricated by means of a petrol/oil  mixture. It is used for the lubrication of demanding two-stroke engines in cars, motorcycles, snowmobiles, waterpumps and generators.
    Zobraziť

  • DYNAMAX MOTOFORCE 4T SYNTECH 10W-40

    Viscosity grade:  10W-40 Performace profile:  JASO MA2   Dynamax Motoforce 4T Syntech 10W-40 is fully synthetic motor oil of outstanding quality developed for highperformance four-stroke engines synthetic oil recommended for four-stroke engines. Suitable for motorcycles which are compatible with wet clutches. Creates effective lubricating film which provides antiwear protection. Ensures long engine life without its powerloss. High and stable viscosity index guarantees optimum lubrication even in the most demanding conditions.
      SDS-Dynamax MF 4T Syntech CLP2017 TDS-Dynamax MF 4T Syntech 10W40
    Zobraziť

  • DYNAMAX MOTOFORCE 4T SUPER 10W-40

    Viscosity grade: SAE 10W-40 Performace profile: JASO MA2 Dynamax Motoforce 4T Super 10W-40 – is a high  quality semi-synthetic oil recommended for fourstroke  engines of motorcycles which is compatiblewith  wet clutches. It is based on high quality synthetic  and mineral base oils combined with special  additives.
    The oil has a high and stable viscosity index, high thermal stability, good low temperature properties, protects against wear, foaming and corrosion. The oil was produced and tested in cooperation with motorcycle manufacturers.
      SDS-Dynamax MF 4T Super 10W40 CLP2017 TDS-Dynamax MF 4T Super 10W40
    Zobraziť

  • DYNAMAX MOTOFORCE 4T SUPER 10W-50

    Viscosity grade:  SAE 10W-50 Performace profile:  JASO MA2 Dynamax Motoforce 4T Super 10W-50 – is a semisynthetic,  four-stroke gasoline engine oil developed  specifically to meet the special requirements of  latest high performance water cooled four-strokemotorcycles. It is based on high quality mineral and synthetic base oils combined with special additives. Provides excellent protection of engine, gearbox and wet clutch. Eliminates clutch slipping and improves drive ability. The oil has a high thermal stability, protects against wear, foaming and corrosion.
      SDS-Dynamax MF 4T Super 10W50 CLP2017 TDS-Dynamax MF 4T Super 10W50
    Zobraziť

  • DYNAMAX MOTOFORCE 4T SYNTECH SCOOTER

    Viscosity grade: SAE 5W-40 Performace profile:  API SL, JASO MA/MA2   Dynamax Motoforce 4T Syntech Scooter – is motor oil produced on the base of fully-synthetic base oil and special additives providing optimum lubrication even in the most demanding conditions. Recommended for highperformance four-stroke engines of modern motorcycles. Provides optimal lubrication of an engine, gearbox wet clutches.
      SDS-Dynamax MF 4T Syntech Scooter CLP2017 TDS-Dynamax MF 4T Syntech Scooter 5W40
    Zobraziť

  • DYNAMAX MOTOFORCE 4T SUPER SCOOTER

    Viscosity grade: SAE 10W-40 Performace profile: API SL, JASO MA Dynamax Motoforce 4T Super Scooter – is a semisynthetic,  four-stroke gasoline engine oil developedspecifically  to meet the special requirements of latest high performance aircooled four-stroke motorcycles. It is based on high quality mineral and synthetic base oils combined with special additives. The oil has excellent anti-wear and anti-corrosion properties. Provides excellent protection of engine, gearbox and wetclutch even in severe operating conditions. Eliminatesclutch slipping and improves drive ability.  
    DYNAMAX MF 4T Super Scooter 10W/40 (SDS, CLP2017) TDS-Dynamax MF 4T Super Scooter 10W40
    Zobraziť

  • DYNAMAX OHHM 32

    Viscosity grade: ISO VG 32 SPECIFICATIONS: HM (ISO-LHM), HLP (DIN 51 524/2) KINEMATIC VISCOSITY AT 40 °C: 3 3 , 5 m m 2 / s VISCOSITY INDEX: 103   Hydraulic oil based on mineral base oil with special additives to provide excellent thermo-oxidant, anticorrosion and anti- wear qualities to prolong the life of the components.   SDS-Dynamax OHHM 32 CLP2017 TDS-Dynamax OHHM 32
    Zobraziť

  • DYNAMAX OHHM 46

    DYNAMAX OHHM 46 is hydrotreated petroleum  oil,with additives to improve oxidation stability,to  reduce corrosion and with anti wear qualities and  anti-foam additives. Contains a viscosity modifier.
    Hydraulic oil OHHM 46 is designed for hydrostatic mechanisms with high mechanical and thermal strain, for stable and mobile machines working in unprotected environments. They can be used all year round and are compatible with most of the hydraulic oils from other manufacturers.
    Zobraziť

  • DYNAMAX OHHM 68

    PERFORMANCE PROFILE: API SG/CF4 KINEMATIC VISCOSITY AT 40 °C: 6 6 , 2 m m 2 / s VISCOSITY INDEX: 99 Hydraulic oil based on mineral base oil with special additives to provide excellent thermo-oxidant, anticorrosion and anti- wear qualities to prolong the life of the components.   SDS-Dynamax OHHM 68 CLP2017 TDS-Dynamax OHHM 68
    Zobraziť

  • DYNAMAX OHHV 32

    Hydraulic oil based on mineral base oil with special additives to provide excellent thermo-oxidant, anti-corrosion and anti- wear qualities. In addition it has high and stable viscosity index.   SDS-Dynamax OHHV 32 CLP2017 TDS-Dynamax OHHV 32
    Zobraziť

  • DYNAMAX OHHV 46

    Hydraulic oil OHHV 46 is a hydrogenation-refined distillate from crude oil with special additives preventing oxidation and corrosion, reducing wear, guarding against foaming and improving viscosity properties.
    This oil is designed for high pressure hydrostatic machines working in a wide range of temperatures, for high pressure piston pumps under the constant and variable lift force with operating speed 2500 rpm and operating pressure about 35 MPa, for rotary vane pumps (pressure up to 20 MPa), as well as for precise hydraulic systems where the temperature plays a great role in viscosity change.
    Zobraziť

  • DYNAMAX OL 22

    DYNAMAX OL 22 is designed for fast-running bearings and gears of undemanding machinery and equipment,for hydrostatic mechanisms of older structures of machine tools. It is also used for tools hardening. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
    Zobraziť

  • DYNAMAX OL 32

    DYNAMAX OL 32 is used to lubricate the bearings  of electric motors and rotary machines of small performance and lubrication of bearings and gears  of machine tools and textile machinery. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-termlubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
      SDS-Dynamax OL 22, 32 CLP2017
    Zobraziť

  • DYNAMAX OL 46

    DYNAMAX OL 46 is used to lubricate the bearings of larger electric motors,fans, etc.., also for long-term fillings of systems for machine tools,for hydraulic system of presses, crank mechanism of piston machines and so on. It is also used for preparation of hardening baths.
    Bearing oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
    Zobraziť

  • DYNAMAX OL 68

    KINEMATIC VISCOSITY AT 40 °C : 6 9 , 3 m m 2 / s VISCOSITY INDEX: 94 Bearing quality oil containing ingredients that benefi cially aff ect oxidation stability and prolong the life of the bearings. It is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery.   DYNAMAX OL 46, 68 (SDS, CLP2017)
    Zobraziť

  • DYNAMAX EMULGOL DS 30

    DYNAMAX Emulgol DS 30 is used in the form  of aqueous,cooling and lubricating emulsions  in turning steel, cast iron, non-ferrous metals.  Recommended working concentration of emulsion  (prepared in water with hardness up to 20 °  N) depending on the method and material: 3-5%  grinding,5-10% turning, milling, drilling, 10-15%  threading.   SDS-Dynamax Emulgol DS 30 CLP2017 DYNAMAX Emulgol DS 30 (TDS, 2018)  
    Zobraziť