+DISSOLVES DEPOSITS AND DEFECTS
+REGENERATES FULL DPF/GPF FUNCTIONALITY
Highly effective additive for effective removal of grease, soot and solid carbon deposits from diesel and gasoline particulate filters (DPF and GPF) while dismantled. The product has been specially formulated to penetrate deep into the pores of the filter, loosen even the most stubborn deposits and maximize the filter’s reverse permeability without mechanically damaging its microstructure. Suitable for all DPFs and GPFs.
Does not contain abrasive or corrosive substances that would damage the ceramic, composite or metal structure of the filter. Restores the original permeability of the filter and regenerates its full functionality. Does not leave sticky or greasy residues. Suitable for all DPFs and GPFs.
Usage:
- Remove the filter from the vehicle.
- Dilute the product with water in a ratio of 1:4 (1:1 in case of heavy contamination).
- Pour 3 to 5 liters (depending on the size of the filter) of the product into a suitable container or cleaning tank and immerse the filter in it.
- Let the product act for approximately 8-10 hours.
- Regularly check the filling level and top up if necessary.
- Remove the filter from the liquid, empty it and rinse it thoroughly with clean water.
- Reinstall the filter in the vehicle and perform a test drive for at least 15 minutes.
DYNAMAX DPF & GPF CLEANING FLUID (SDS, CLP2018)
DYNAMAX DPF & GPF CLEANING FLUID – TDS
