Perfectly clean vehicle from every angle? It is a challenge that DYNAMAX accepted and brought car cleaning products to the car care market focusing on the hidden details at first glance, but no less significant. Treatment of tyres, removing unwanted rust, clean engine, carburetor, brakes and, after all, clean hands. This is the answer to all the questions that only the comprehensive range of high-quality and affordable DYNAMAX cleaning products can give.
-
Metalfree grease to prevent clenching of brake systems. Product characteristics: High thermal stability. Resistant to chemicals and weather influences. Simplifies future disassembly. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Spray the brake parts to be treated prior to assembly. Avoid contact with brake disc brake and pads. -
Effective tool to loosen rusted or pressed connections. Product characteristics: Directed jetspray. Brie lowers temperature to –50°C. The aerosol should have room temperature. Processing temperature 5 – 30°C. Spray the connection by repeatedly pressing the nozzle brie y. As a result of the erce decrease in temperature, the connection can be loosed. -
Spray grease to lubricate mechanical parts of metal or plastic. Product characteristics: Prevents wear and sticking. Outstanding mechanical and thermal stability. Water-repellent. Shake before use. Optimum lubrication is obtained after evaporation of the solvent. -
Dry surface lubricant to treat mechanical parts of metal and plastic where no residues of oil or grease are desired. Product characteristics: No residues of oil or grease (dry film). Very low friction factor. Suitable as release agent for moulds where the use of silicones is not desired. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Apply PTFE Dry in a thin layer. After evaporation of the solvent, a protective, dry PFTE-film will remain. -
Metal-free ceramic grease to treat parts which are liable to heavy workload and/ or which are exposed to very high temperatures. Product characteristics: Protects against electrolytic corrosion. High thermal stability. Prevents wear and sticking. Extremely suitable for mounting ABS and ASR brake systems and lambda sensors. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Apply the ceramic grease. The specific properties are achieved after evaporation of the solvent. -
Tar & Resin Remover. Spray to remove tar, bitumen, asphalt and resin. Shake before use. Apply and allow to take effect. Remove the dirt with a cloth. With persistent contamination, repeat the treatment. -
Spray with a high copper content to lubricate screw connections which are exposed to very high temperatures. Product characteristics: High thermal stability. Prevents wear and sticking. Resistant to chemicals and weather influences. Rust preventive. Shake before use. The specific lubrication properties is achieved after evaporation of the solvent (approximately 1 minute). -
Practical wipes for thorough and fast hand cleaning. Provides maximum hand cleanliness and pleasant smell. -
Effective foam to clean the air-conditioning in motor vehicles. Neutralizes odors from standing water in drain pains. Leaves refreshing smell. Particularly easy and quick application: no effort and the car can be used again after couple minutes. Shake before use. Insert the adapter into the air inlet of the airconditioning and completely empty the can. SDS-Dynamax Airco Cleaner spray CLP2017 DYNAMAX Airco Cleaner spray (TDS, 2017) -
A tool for starting problems with internal combustion engines. The safe cold starting of all engines is made possible by a special combination of ingredients. Starter Spray is ideal at low temperatures, in damp weather or after longer engine downtimes. The spray protects both the engine and the battery. Product characteristics: Fast-acting. Ether-based. Shake before use. Usage: Inject the Start spray into the air inlet of the air filter for several seconds. DYNAMAX Start spray (SDS, CLP2017) DYNAMAX Start spray (TDS, 2017) -
Effective tool to loosen rusted parts. Penetrates deeply into spaces between metal to metal rusted and corroded mechanical parts, such as nuts and bolts. Decreases maintenance, reduces wear and friction and provides a protective layer to prevent further corrosion/oxidation. Product characteristics: Good penetrating properties Contains graphite and MoS2. Moisture repellent. Rust preventive. Can be used in various positions. Powerful jet spray. Shake before use. Apply the penetrating oil and allow it to take effect. DYNAMAX Penetration Oil spray (SDS, CLP2017) DYNAMAX Penetration Oil spray (TDS, 2017) -
High-quality multi-purpose spray with 360° disperser. Effectively lubricates, relieves, prevents corrosion and protects all types of mechanical car parts. Recommended for use in the workshops, for house hold use, for garden equipment, car service stations and thanks to its resistance to high temperatures it is also suitable for industrial machinery. Cleans ingeffect. Rust preventive. Shake before use. Optimum lubrication is obtained after evaporation of the solvent. SDS-Dynamax Multispray CLP2017 TDS-Dynamax Multispray