-
Universal solvent-free cleaner. Cleans engines, gearboxes, tarpaulins for trucks, cars and boats, flooring in workshops and other oil-contaminated areas that leave no residue. Use: Spray the preparation on dirty surface. After application, let the preparation work for 5-10 minutes and then thoroughly rinse with water. Do not apply to emblazed objects, electrical parts of a car or other equipment. -
Transparent spray to prevent damage to cables and wires caused by martens. Martens will avoid the treated surfaces, in view of the unique, sticky protection film. Product characteristics: Lasting protection. Resistant to weather influences and weak acids and bases. Inodorous. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Apply in an equal layer on the surface to be protected -
Rubber based spray to execute emergency repair on tubeless as well as tube-type tyres. Usage: Hold the spray can upside down in a vertical position, attach the spraying adapter to the tyre valve, press and hold the dispenser until the container is empty. Inflate the tyre to the appropriate pressure. Maximum run is 10 km at the maximum speed of 50 km/h. DYNAMAX Tyre Repair spray (SDS, CLP2017) DYNAMAX Tyre Repair spray (TDS, 2017) -
Metal-free ceramic grease to treat parts which are liable to heavy workload and/ or which are exposed to very high temperatures. Product characteristics: Protects against electrolytic corrosion. High thermal stability. Prevents wear and sticking. Extremely suitable for mounting ABS and ASR brake systems and lambda sensors. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Apply the ceramic grease. The specific properties are achieved after evaporation of the solvent. -
Metalfree grease to prevent clenching of brake systems. Product characteristics: High thermal stability. Resistant to chemicals and weather influences. Simplifies future disassembly. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Spray the brake parts to be treated prior to assembly. Avoid contact with brake disc brake and pads. -
Spray grease to lubricate mechanical parts of metal or plastic. Product characteristics: Prevents wear and sticking. Outstanding mechanical and thermal stability. Water-repellent. Shake before use. Optimum lubrication is obtained after evaporation of the solvent. -
Dry surface lubricant to treat mechanical parts of metal and plastic where no residues of oil or grease are desired. Product characteristics: No residues of oil or grease (dry film). Very low friction factor. Suitable as release agent for moulds where the use of silicones is not desired. The aerosol should have room temperature. Processing temperature 5 – 30°C. Shake before use. Apply PTFE Dry in a thin layer. After evaporation of the solvent, a protective, dry PFTE-film will remain. -
Spray with a high copper content to lubricate screw connections which are exposed to very high temperatures. Product characteristics: High thermal stability. Prevents wear and sticking. Resistant to chemicals and weather influences. Rust preventive. Shake before use. The specific lubrication properties is achieved after evaporation of the solvent (approximately 1 minute). -
Effective tool to loosen rusted or pressed connections. Product characteristics: Directed jetspray. Brie lowers temperature to –50°C. The aerosol should have room temperature. Processing temperature 5 – 30°C. Spray the connection by repeatedly pressing the nozzle brie y. As a result of the erce decrease in temperature, the connection can be loosed. -
Tar & Resin Remover. Spray to remove tar, bitumen, asphalt and resin. Shake before use. Apply and allow to take effect. Remove the dirt with a cloth. With persistent contamination, repeat the treatment. -
Silicon spray that lubricates and protects plastic, metal or rubber parts. Product characteristics: Prevents creaking, squeaking and corrosion. Prevents freezing and drying out. The product is water-repel-lent and has outstanding mechanical and thermal stability. Usage: Shake before use. Optimum lubrication is gained after the evaporation of the solvent. DYNAMAX Silicon spray (SDS, CLP2018) DYNAMAX Silicon spray (TDS, 2018) -
Electronic contact cleaner spray that repels moisture. Product characteristics: Water repellent. Effective penetration. Usage: Keep and use at room temperature. Shake before use. Apply sufficient amount of the cleaner on the surface and let it dry. After evaporation it leaves transparent protective film. DYNAMAX Contact spray (SDS, CLP2017) DYNAMAX Contact spray (TDS, 2017)
