//Car Accessories
  •

    DYNAMAX WIPER FLAT

    + HIGH QUALITY FLAT TECHNOLOGY + COMPATIBLE WITH ALMOST 99% OF CARPARK + EASY INSTALLATION + LONG LIFE   Universal graphite flat wiper with 6 adapters for quiet and efficient wiping available in 10 sizes. Thanks to special adapters, it is suitable for more than 90% of the vehicle fleet. The wipers have a low profile and thanks to the built-in spoiler with increased downforce, they provide maximum grip and visibility in all conditions. Optimal visibility is guaranteed even during bad weather and high speed. High quality flat technology ensuring trouble-free operation and quiet wiping. The wiper blade is made of a high proportion of natural graphite and a synthetic component to ensure high quality and durability of DYNAMAX wipers. The new DYNAMAX wipers are characterized by simple and quick installation. The wiper blade is wrapped in a protective case that must be removed before installation. This cover protects the wiper blade throughout the transport to the customer.   Available in size
    EU size  US size
    350 mm 14 inch
    380 mm 15 inch
    410 mm 16 inch
    430 mm 17 inch
    450 mm 18 inch
    480 mm 19 inch
    510 mm 20 inch
    530 mm 21 inch
    560 mm 22 inch
    580 mm 23 inch
    610 mm 24 inch
    630 mm 25 inch
    660 mm 26 inch
    700 mm 28 inch
      Adapters and compatible arms
    Compatible arm Code designation of the DYNAMAX adapter
    Side pin 5x22 mm A01
    Side pin 5x17 mm
    Bayonet 9x4 mm A02
    Push button 16 mm A03
    Push button  19 mm A04
    U-hook 8,7x7 mm A05
    U-hook 9x11 mm
    Pinch tab 15mm A06
      For a complete list of compatible vehicles and additional information, see the catalog. The product is not an original product of car manufacturers.
    Zobraziť

  • DYNAMAX BOOSTER CABLES

    High-quality copper-aluminum cables and their thick weave guarantee good conductivity, easy and quick use and long-term service life. High-quality insulated clamps ensure a firm grip of the terminals and minimize the risk of accidental short circuit. Thanks to the practical packaging, the cables will always be protected from dirt, securely secured and ready for repeated use.   Instructions for use:
    1. Both car batteries must have the same voltage.
    2. Start the engine of the car from which you want to run the voltage.
    3. Connect the red clamps to the positive (+) poles of both batteries so that they do not touch other parts of the vehicles.
    4. Connect the black clamps to the negative (-) poles of the batteries so that they do not touch the red clamps.
    5. If possible, let the engine of the vehicle from which you want to run the voltage run at high revs.
    6. If the vehicle does not start within 10 seconds, wait a minute and try again.
    7. After the vehicle has started, first disconnect the negative (-) poles and only then the positive (+). Keep in mind that the positive poles of the clamps must not touch the negative poles. The red clamps must not touch the metal parts of the vehicle.
      Available in variants
    • Booster cables with a maximum current load of 400 A, with a length of 2.5M, cable cross-section of 9mm²
    • Booster cables with a maximum current load of 600 A, with a length of 4M, cable cross-section of 10mm²
       
    Zobraziť